Specifications: 499 available from Hines Equipment Co., NC

 
   

499

Auger    

Auger

  NA

Floating range, in. (mm)

  NA

Speed, rpm

  NA
Conditioner    

Conditioner

  Chevron-design intermeshing molded rubber rolls, torsion-bar roll pressure, single hand-crank adjustment

Roll length (crushing area), in. (mm)

  110 (2794)

Roll diameter, in. (mm)

  10-3/8 (264)

Drives   

  Gear/shaft

Speed, rpm 

  665

Pressure, lbs./in. (N/mm)

  2 to 38 (0.3 to 6.6)

Roll gap adjustment

  Shims

Material discharge, in. (mm)

  Adjustable gate for swath, windrow or intermediate widths

 

  38 and 100 (965 and 2540)
Cutterbar    

Cutterbar

  Two opposing assemblies, timed, dual, counter-stroking sickles

Knives

  Bolted, over-serrated sections, adjustable assemblies, timed, dual, counter-stroking sickles

Guards

  Twin, forged steel, double-hardened hold-downs

Cutting height, in. (mm)

  1.25 to 6.25 (32 to 159)

Cutting angle, degrees

  -4 to -10, mech std

Hydraulic tilt

 

Guard points max lift, in. (mm)

  19-1/2 (495)

Skid shoes

  2

Sickle drive

  enclosed gearbox

Sickle speed, spm

  1700

Sickle stroke, in. (mm)

  3 (76)
Cutting Width    

Cutting Width, ft. in. (mm)

  12'3" (3734)
Dimensions    

Overall width, operating, ft. in. (mm)

  19'8" (5994)

Overall width, transport, ft. in. (mm)

  13'9" (4191)

Overall length, transport, ft. in. (mm)

  21'6" (6553)

Overall height, operating, ft. in. (mm)

  6'2-1/2" (1892)

Overall height, raised, ft. in. (mm)

  6'8-1/2" (2045)
Drive    

Drive

  540 or 1000 rpm PTO
Hydraulic Cylinders    

Hydraulic Cylinders

  Standard header lift, Standard tongue shift
Minimum Tractor Req    

Minimum Tractor Req

  60-hp (45 kw)

 

  Two remote hydraulic circuits required capable of 1750 psi (12066 kpa)
Operating Speed    

Operating Speed, mph (kph)

  up to 8 (13)

Max safe transport speed, mph (kph)

  25 (40)
Reel    

Reel

  Rolareel

Peripheral speed, mph (kph)

  standard: 4.8 to 7.9 (7.7 to 12.7), with reduction kit 4.0 to 6.6 (6.5 to 10.7)

Speed Adjustment

  Variable sheave

Diameter (maximum), ft. in. (mm)

  3'7-1/2" (1105)

Adjustments

  Fore/aft and vertical

Drive 

  Belt and chain

Bushings/bearings, in. (mm)

  1.25 (31.75) bearing w/collar at cam end and bushings at all other locations
Tires    

Tires

  11L x 14 4-ply ag implement (HUT)
Tractor Hookup    

Tractor Hookup

  Hydrostatic
Weight    

Weight, lbs. (kg)

  4480 (2032)