Specifications: Discbine 313-Flail Mower Conditioner available from Hines Equipment Co., NC

 
   

Discbine 313 (flail)

New Holland-Disc Cutterbar    

Type

  MowMax™ II True Modular Disc Cutterbar

Width of Cut, ft. in. (m)

  13' 0" (4)

Number of discs

  8

Number of knives

  16 (2 per disc)

Disc Speed, rpm

  2,250

Cutting angle

  2 to 10 degrees

Hydraulic Cutting angle control

 

Standard Cutting height skid shoe, in. (mm)

   0.79-2.07 (20-69)

Fixed Raised, high-stubble skid shoe

   .79-5.75 (20- 146)

Adjustable Raised, high-stubble skid shoe

   3-5.5 (76 - 140)

BioMass skid shoe

   5-7.75 (127- 197)

Ground clearance with header fully raised, in. (mm)

  16.2" (411)

Cutterbar Flotation

  Vertical and lateral, adjustable springs

QuickMax™ Knife Change System

 

ShockPro™ Disc Drive Hub protection system

 

MowMax™ 3-year cutterbar protection plan

 
Chevron-Design Roll Conditioner    

Chevron-Design Roll Conditioner

 

Type.

  Choice of molded rubber or steel rolls

Roll Length, in. (mm)

  125 (3175)

Roll Diameter, in. (mm)

  10.4 (264)

Roll Drive

  4 HB V-belt and enclosed gears

Roll Speed, rpm

  Two-Speed: 750 or 640

Roll Pressure System

  Torsion Bar

Conditioner Intensity Adjustment

  Single crank adjustable roll pressure and two stop bolts to adjust roll gap
LeaningEdge™ Flail Conditioner    

LeaningEdge™ Flail Conditioner

 

Number of LeaningEdge flails

  120

Semi-Swinging LeaningEdge flail design

 

Rotor Diameter, in. (mm)

  22 (560)

Standard Speed, rpm

  1042

Optional Slow Speed, rpm

  752

Drive.

  4 HB V-belt

Conditioner Intensity Adjustment.

  Single crank adjustable rotor hood

Optional Textured Hood Liner Kit

 
Attachment    

Standard Drawbar

  -

Drawbar Swivel Hitch

 

2-pt Swivel Hitch

 
Dimensions    

Height, Transport, ft. in. (m)

  7' 5" (2.26)

Height, Operating, ft. in. (m)

  6' 7" (2.01)

Width, Transport, ft. in. (m)

  13' 4" (4.04)

Width, Operating, Std. Drawbar Hitch, ft. in. (m)

  -

Width, Operating 2-pt Swivel Hitch, ft. in. (m)

  21' 3" (6.5)

Width, Operating Drawbar Swivel Hitch, ft. in. (m)

  19' 7'' (6.0)

Length, Transport, Standard Drawbar Hitch, ft. in. (m)

  -

Length, Transport, 2-pt Swivel Hitch, ft. in. (m)

  27' 5'' (8.4)

Length, Transport, Drawbar Swivel Hitch, ft. in. (m)

  26' 5" (8.1)

Length, Operating, Standard Drawbar Hitch, ft. in. (m)

  -

Length, Operating, 2-pt Swivel Hitch, ft. in. (m)

  23' 0'' (7.0)

Length, Operating Drawbar Swivel Hitch, ft. in. (m)

  22' 0'' (6.7)

Weight, Operating lbs. (kg)

  6,275 (2846)
Drive    

Drive

  1000 rpm PTO, enclosed gears and four HB belt
Drive Protection    

Drive Protection

  Slip clutch and over-running clutch
Hydraulics    

Hydraulic swing

  Standard (double-acting cylinder)

Operating Position

  Center-Pivot, Right or Left Side

Hydraulic lift

  Standard (operated by two single-acting cylinders; master/slave)

Hydraulic tilt

  Standard (operated by single-acting cylinder and incorporated into the lift system)
Material Discharge    

Swath, ft. (mm)

  10 (3000)

Windrow, ft. (mm)

  Adjustable from 3 to 8 (914 to 2400)

Wide Thin Fin Kit (100 % Coverage)

  -
Speeds    

Operating, mph (kph)

  0 to 9 (0 to 14.5)

Transport, mph (kph)

  20 (32)
Tractor Requirement    

Tractor Requirement

  90 PTO hp (67 kW) or greater with standard ASAE Category II or III drawbar.

Hydraulic valves

  All models require two remote hydraulic valves capable of 1500 psi (10343 kPa), 7-pin SAE J560 connector for transport lights
Tubeless Ag Rib Implement Tires    

Size

  12.5L x 15 8PR