Features T6.175 available from Hines Equipment Co., NC

 

POWERFUL. RESPONSIVE. EFFICIENT.

New T6 Series tractors give you power without compromise. The new Tier 4B certified engines have some impressive numbers—numbers that not only look good on paper, they translate into increased lugging power and efficiency.

ECOBLUE™ HI-ESCR TECHNOLOGY—ONE SIMPLE SOLUTION

New T6 engines comply with the even-more-stringent Tier 4B emissions standards by using New Holland ECOBlue HI-eSCR (High-Efficiency Selective Catalytic Reduction) technology. This after-treatment system allows the engine to breath clean, fresh air to optimize combustion, torque rise and fuel efficiency.

TORQUE RISE AND RESPONSE THAT OUTPERFORMS PREVIOUS T6 MODELS

T6 engines achieve better performance by maximizing power output from each cylinder. The new engine control unit brings the engine to maximum torque more quickly and holds through the lower RPM longer to outperform former T6 Series engines. New Tier 4B 4-cylinder engines can outperform prior 6-cylinder engines due to this latest technology.

ENGINE POWER MANAGEMENT WITH POWER BOOST

T6 engines deliver extra horsepower when under load—a boost above rated horsepower—to get you through tough conditions.

CONSTANT RPM WITH ENGINE SPEED MANAGEMENT

In applications where a constant PTO speed is required, just select Engine Speed Management to ensure the speed is maintained even under changing loads. In many applications, this allows you to maintain a fixed forward speed in difficult terrain.

THE SAME TOTAL FLUID CONSUMPTION

Even with increases in horsepower, torque and lugging ability compared to previous T6 models, fluid use (Fuel and DEP) remain unchanged.

CHOICE OF AWARD-WINNING TRANSMISSIONS

New Holland provides you with a wide selection of proven transmissions, including the advanced Auto Command™ Continuously Variable Transmission (CVT).

• 16x16 Electro Command™ semi–powershift, 25 mph (40 kph) 
• 16x16 Electo Command semi–powershift with AutoShift, 25 mph (40 kph) 
• 17x16 Electro Command Economy with AutoShift) semi-powershift with reduced engine speed for fuel savings, 25 mph (40 kph 
• 17x16 Electro Command semi-powershift with AutoShift semi-powershift, 31 mph (50 kph) 
• 32x32 Electro Command semi-powershift with AutoShift and Creeper , 25 mph (40 kph) 
• Auto Command CVT , 25 mph (40 kph) 
• Auto Command CVT, 31 mph (50 kph)

31-MPH OPTION FOR FASTER TRAVEL

If you put a lot of road mileage on your tractor, choose a T6 tractor with a 31-mph (50-kph) transmission to speed up your travel between fields or jobs.

GO WITH THE FLOW—OPTIMUM PERFORMANCE WITH BALERS, MOWERS, SNOW BLOWERS AND MORE

Auto Command Continuously Variable Transmission (CVT) provides you with infinite speed control for optimum performance of balers, mower-conditioners, snow blowers and other material flow implements.

SIDEWINDER™ II ARMREST

T6 tractors equipped with the Auto Command CVT transmission feature the convenience and added comfort of the SideWinder™ II armrest. The armrest glides forward or back to put controls exactly where you want them. The CommandGrip™ multi-function handle at the front of the SideWinder II armrest puts the most important controls right at your fingertips.

HYDRAULIC POWER AND FLEXIBILITY

New Holland gives you choices when it comes to the T6 hydraulic system. T6 Value models come standard with a fixed-displacement, open-center hydraulic system with an 21.1 gallon-per-minute (GPM) gear pump and a separate 12.4-gpm steering pump.

29.9-GPM CCLS SYSTEM

If you require more hydraulic capability, select the closed-center, load-sensing (CCLS) hydraulic system. It’s ideal for more demanding implements. The system includes a 29.9-gpm variable displacement piston pump for the rear remotes, three-point hitch and loader (if equipped) plus the 12.4-gpm steering pump.

33-GPM CCLS WITH CVT

T6 models with the Auto Command™ CVT come with a 33-gpm CCLS hydraulic system.

HITCH LIFT CAPACITY FROM 8,388 TO 11,649 POUNDS

Standard lift capacity at the three-point hitch is 8,388 pounds for Value tractors, 9,213 pounds for T6 Plus and Elite tractors and 11,649 pounds for T6 tractors equipped with Auto Command™ CVT.

OPTIONAL FRONT 3-POINT HITCH

For Elite and Auto Command T6 tractors, a front three-point hitch is available, providing a lift capacity of 6,834 pounds.