Specifications: T4050F available from Hines Equipment Co., NC
| Approximate Weights | ||
|
2WD Less Cab, lbs. (kg) |
6266 (2842) | |
|
2WD Cab, lbs. (kg) |
6460 (2930) | |
|
SuperSteer FWD Less Cab, lbs. (kg) |
6420 (2912) | |
|
SuperSteer FWD Cab, lbs. (kg) |
6614 (3000) | |
| Dimensions | ||
|
Platform Type – Cab / Rollbar |
Iso mounted, straddle platform | |
|
Wheelbase |
||
|
2WD, in. (mm) |
85.4 (2170) | |
|
SuperSteer FWD, in. (mm) |
95.9 (2435) | |
|
Tire Track Widths** |
||
|
Front 2WD, in. (mm) |
45.1 (1146) – 63.5 (1612) | |
|
Front SuperSteer FWD, in. (mm) |
41.8 (1062) – 58.7 (1492) | |
|
Rear, in. (mm) |
43.6 (1108) – 61.0 (1550) | |
|
Min. Overall Width,** in. (mm) |
58.5 (1486) | |
|
Height to Top of Rollbar,*** in. (mm) |
89.5 (2274) | |
|
Height to Top of Dash, *** in. (mm) |
50.8 (1290) | |
|
Height to Top of Cab, *** in. (mm) |
85.5 (2173) | |
| Electrical | ||
|
Battery, volts/cca |
12/800 | |
|
Alternator, amps |
120 | |
|
Cold Start Aid |
Grid Heater | |
| Engine | ||
|
Type |
4-cycle, diesel | |
|
Make |
New Holland | |
|
Model |
NEF | |
|
Cylinders / Aspiration |
4, Turbocharged and Intercooled | |
|
Displacement, cu. in. (L) |
274 (4.5) | |
|
Block Type |
Parent Bore | |
|
Rated Speed, RPM |
2300 | |
|
Gross Engine Horsepower† |
95 | |
|
PTO Horsepower† |
35% | |
|
Torque Rise† |
293 (398) @ 1300 rpm | |
|
Maximum Torque, lb.-ft. (Nm)† |
Tier III | |
|
Emission Legislation |
||
| Front Axle | ||
|
2WD Front Axle |
||
|
Steering Angle, degrees |
55 / 57 | |
|
SuperSteer™ FWD Front Axle |
||
|
Front Differential Lock |
Fully locking, electro-hydraulic engaged | |
|
Steering Angle, degrees |
76 / NA | |
| Fuel, Air and Lubrication System | ||
|
Injection Pump |
Bosch VE, Rotary | |
|
Injector Type |
Direct | |
|
Fuel Filter Type |
Dual stage fuel filtering system with water/sediment separator followed by a paper filter element cartridge | |
|
Fuel Tank Capacity, gal. (L) |
19.3 | |
|
Air Filter Type |
Dry, Dual Element | |
|
Service Interval†† |
600 hours | |
|
Muffler |
Under hood | |
|
Exhaust Outlet |
Under right side of operator's station | |
| Hydraulic System | ||
|
System Type |
Open Center | |
|
System Pressure, psi. (bar) |
2755 (190) | |
|
Implement Pump Flow, gpm. (L/Min) |
||
|
Base - Mechanical Shuttle |
17.2 (65) / 17.2 (65) | |
|
Base - Power Shuttle |
17.2 (65) / 17.2 (65) | |
|
Optional |
NA / NA | |
|
Steering & Services Pump, gpm. (L/Min) |
||
|
Mechanical Shuttle |
9.2 (34.8) / 9.2 (34.8) | |
|
Power Shuttle |
9.2 (34.8) / 9.2 (34.8) | |
|
Remotes Valves |
2 (Base), 3 (Optional, includes flow control) | |
|
Draft Control |
Mechanical | |
|
Upper / Lower Limit Setting |
Lift-O-Matic | |
|
3-Pt Hitch Lift Capacity (24” behind lift point), lbs. (kg) |
4045 (1835) | |
|
Front Lift and PTO |
Optional / NA | |
| Rear PTO | ||
|
540/1000 RPM |
 |
|
|
Engagement |
Mechanical with Hydraulic Servo-Assist | |
| Transmission | ||
|
Transmissions |
Base: 16x16 with a Mechanical Shuttle | |
|
|
Option 1: 16x16 with a Power Shutttle | |
|
|
Option 2: 32x16 Dual Command with a Power Shuttle | |
|
Clutch Type / Size (Mechanical), in. (mm) |
Dry, 11 (280) diameter, heavy-duty cerametallic materia | |
|
Clutch Type / Size (Electro-hydraulic), in. (mm) |
Wet, six plates 5.2 (133), organic material | |
|
Top Speed |
Base: 30 KPH, Optional: 40 KPH (FWD models only) | |
| Turning Performance | ||
|
Turning Radius |
||
|
2WD – without Brakes, ft. (m) |
11.1 (3.4) | |
|
SuperSteer FWD – without Brakes, ft. (m) |
10.8 (3.3) | |
|
Turn Around Diameter |
||
|
2WD – without Brakes, ft. (m) |
13.3 (4.1) | |
|
SuperSteer FWD – without Brakes, ft. (m) |
8.4 (2.6) |