Specifications: TV6070 Bi Directional available from Hines Equipment Co., NC

 
   

TV6070

3-Point Hitches    

Type      

  Category II, flex link ends and sway links

Controls

  Electronic position control, auto and manual modes

Standard cab end Lift capacity @ 24" behind links, lbs. (kg)

  6,500 (2950)

Optional cab end Lift capacity @ 24" behind links, lbs. (kg)

  8,700 (3950)

Optional engine end Lift capacity @ 24" behind links, lbs. (kg)

  4,000 (1800)
Axles and Brakes    

Axle type

  HD flange with inboard planetary reduction

Differential lock, cab end

 

Differential lock, engine end

 

Oscillation, degrees

  10

Brake type

  Wet disc in cab-end axle, hydraulic actuation

Total brake area, in² (cm²)

  507 (3271)

Parking brake

  Cable actuation of service brakes
Cab    

Type        

  2-Door ROPS/FOPS

Tinted safety glass, area, ft² (m²)

  61 (5.67)

Climate control

  Pressurizer, heater/defroster, air conditioning

Fan

  3-speed

Seat

  Air suspension, 7 comfort adjustments

Turnabout™ console

  210 degree rotation to face either driving direction
Drawbars    

Type         

  3-position adjustable, swinging

Cab end

 

Engine end

 
Electrical    

Type 

  12v negative ground

Batteries

  Two group 31 low maintenance

Cold start rating, each, CCA

  950

Alternator, amps

  120
Engine    

Make/model

  FPT

Type

  6-cylinder parent bore diesel

Fuel Injection

  Bosch mechanical pump, direct injection

Bare engine power, HP (kw)

  155 (116)

Rated speed, RPM

  2,200

Idle speed, RPM

  850-950

Displacement, cu. in. (L)

  6 / 411 (6 / 6.7)

Aspiration

  Turbocharged/air-air intercooled

Air cleaner

  Dual element dry with aspirated spin tube precleaner

Cold start aids

  Grid heater/coolant block heater

Bio diesel compatibility

  Up to 100%
Hydraulic Systems    

Standard system-type

   

  Type    

  CCLS with piston pump

  Total flow @ 2200 engine RPM, GPM (LPM)

  29.5 (111)

  Pressure compensator, PSI (Bar)

  3,000 (207)

  Remote valves-standard cab end

  3

  In-cab flow controls

  3

  Valve actuation

  Hand levers, foot pedals

  Remote valves-optional engine end

  2

  Valve actuation 

  Hand levers

  Couplers

  1/2" ISO, 2 for each valve

Optional auxiliary hydraulics

   

  Type     

  CCLS with piston pump; electronic flow control

  Maximum flow @ 2200 engine RPM, GPM (LPM)

  35 (133)

Pressure compensator, PSI (Bar)

  4350 (300)

Couplers 

  3/4" ISO, with 1/2" case drain
PTO Systems    

Type   

  Mechanical 540/1000 RPM

Shafts

  Interchangeable 1 3/8" diameter

Engagement

  Electro-hydraulic

Locations- cab end

 

Locations- engine end

 
Rated PTO    

Rated PTO power, HP (kw)

  105 (78)
Refill Capacities    

Fuel tanks, gal. (L)

  55 (208)

Engine oil, gal. (L)

  5 (19)

Engine coolant, gal. (L)

  7.25 (27)

Hydraulic system/rear axle, gal. (L)

  13.5 (51)

Front axle, gal. (L)

  6.5 (25)
Steering    

Type       

  Hydrostatic power

Articulation angle

  45 degrees maximum

Curb clearance circle ft. in. (m)

  32' 10" (10.0)
Transmission    

Type  

  Multi-range closed-loop hydrostatic

Pump

  Variable displacement, mechanical operator control

Motor

  Electronically controlled 8-range variable displacement

Ground speeds in ranges, MPH (KPH)

   

  1

  0 to 6.7 (10.8)

  2

  0 to 7.7 (12.4)

  3

  0 to 8.3 (13.4)

  4

  0 to 9.1 (14.6)

  5

  0 to 10.3 (16.6)

  6

  0 to 11.6 (18.7)

  7

  0 to 16.2 (26.0)

  8

  0 to 19.5 (31.4)

Braking

  Dynamic braking by moving lever to neutral position